Rubber printing stamp, Atlanta Arsenal Label .69 cal bundle, 1863

Description

SHIPPING WHEN YOU BUY 3+ - Applies on all label printing stamps (choose Add to cart option)
Rubber arsenal label printing plate (stamp) for Atlanta Arsenal buck and ball cartridge bundle, 1863
The Atlanta Arsenal was established by the Confederate Army, after Nashville was occupied by the Union troops. The supply and workers from Nashville were moved to Atlanta under the command of colonel Moses H. Wright in February 1862. At its peak it employed nearly 5000 workers until Sherman advanced on Atlanta in August 1864. The supplies, tools and personnel were relocated to other arsenals, like Columbus and Macon Arsenal. These bundles held 10 buck and ball cartridges with a length of approximately 2.35-2.6”. The projectile in the paper case was one round ball and three 0.300-0.315 buckshot.
Please note that you are solely purchasing the rubber plate, no other accessories are shipped in the package, except for this manual of instructions.
Instructions on making bundles
Tools you will need: scissors, white string, off-white craft paper, folding box, .54 cal wooden dowel for making cartridges, ink stamp pad, stamping ink
Cut the paper sheets.
Wrapper size
Bundle size
Length (inch)
Width (inch)
Length (inch)
Width (inch)
Depth (inch)
.69 Musket Minié
10
8
2,5
3,4
1,45
. 58 Musket and rifle Minié
9
6,5
2,6
2,9
1,15
.69 Round ball
9
6,5
2,6
3,1
1,35
.69 Buck n’ ball
9
6,5
3,1
3,1
1,35
.54 Sharps
10
6,8
2,6
2,5
1,1
Theoretically the expanding ball .69 cal musket and .58 cal rifle and rifle musket cartridges had ordinary colour wrappers, the .58 cal cadet rifle shooting a lighter recoil cartridge with decreased powder charge and bullet wait had red colour wrapper, the .69 cal ball cartridges wrappers were supposed to be of green colour, while the buckshot cartridge wrappers were supposed to be red again. In practice these colour codes were seldom used during the conflict, therefore the labels and images of the wrappers were the key information source in differentiating the various cartridge bundles.
Make the folding box by nailing two strips of wood to a 10×8” wooden plank. The length of the wooden strip is 2.6”, the distance between them is 5 times the diameter of the ball, their height is two times the diameter of the ball.
Attach the rubber stamp to an appropriate size of wood with surface sanded smooth. Use double sided tape to attach the stamp.
Apply ink to the stamp using the ink pad saturated with the desired colour (black or red) ink. Be sure that the complete surface is covered. Place the paper sheet on a semi hard surface (like 10 sheets of paper), and gently press the stamp on the paper. Experiment with different inks, pressure and paper quality to get the best result.
Place the wrapper paper in the centre of the folding box, with the short sides towards the two sides of the box.
Please 10 cartridges parallel with the sides of the box on the wrapper in two tiers with balls alternating.
Roll a cartridge trapezoid on the .54 cal wooden former, choke and tie on one end, add 12 or 13 (late C.S.) percussion caps, and fold the tail. Insert the cap’s package in the opening of the cartridge bundle.
Bring the two short sides of the paper together, and fold the sides like you were wrapping a gift box. Do not make perfect edges, but the bundle has to be stiff.
Tie the bundle, first in the direction of the length, then its breadth, with the twine fastened in a single bow-knot.
Enjoy your excellent cartridge bundle creating according to the original method using a Capandball Arsenal label stamp.
Made in Hungary, EU.
P
roducer: Capandball
Please find a wide range of American Civil War Capandball paper cartridge frormer and revolver cartridge box packages in our eBay store:
https://www.ebay.com/str/capandball