JEWELRY POLISHING COMPOUNDS ROUGE PRECIOUS METALS 8 Pc

Description

JEWELRY POLISHING COMPOUNDS - PRECIOUS METALS - POLISH COMPOUND SET 8 PCS
POLSHING COMPOUNDS  -  DIALUX
®
FRENCH  -  ROUGES   ASSORTMENT SET OF 8 BARS
-
2 EACH OF -
RED
/
BLUE
/ WHITE /
GREEN
-
DIALUX
®
Brand polishing compounds originally formulated in France have been a popular polishing compounds used in  Jewelry Polishing for over 50 years.
THESE ARE THE ORIGINAL - NOT A LOOK ALIKE OR A SIMILAR From China
The Dialux polishing compounds are a high grade premium polishing line of compounds specifically formulated for Precious Metals in Jewelry Polishing.
DIALUX
®
POLISHING AND FINISHING COMPOUNDS
Bar sizes: 4" x 1-1/8" x 1-1/8"
Bars are individually wrapped like Chocolates
Bar Weight: 110 Grams - 4oz.
·
RED "ROUGE DE PARIS"
-
Used for super finishing yellow color metals, especially Gold
·
BLUE "BLEU DE PARIS"
-
Used for High Shine on all metals
·
WHITE "BLANC"
-
Used for Bright Polish on White Metals - Silver
·
GREEN "VERT"
-  Used for Polishing White Color metals
NOTE:
We have included polishing recommendations at the bottom of this page, to assist you.
JETS Product # 1614-9083567
Made by Lippert/Unipol
NOTE: Visit
JETSTOOLS
ebay Store Listings, where you can buy
individual
Dialux Compounds and see a variety of many other Polishing Compounds, Buffing Wheels and more
J
ewelers
E
quipments
T
ools
&
S
upplies
.
POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·
Use the right compound for the metal that you are trying to polish
·
It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·
Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·
Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·
Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.
If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·
A clean buffing wheel edge is important.
·
Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.
·
Whenever you are working with Platinum never use a buff that was used for another type of metal.
·
WORK SAFE!
Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.
PROTECTION -
Protect yourself, your fingers and hands, your face and eyes and use respirators.
FRE 2.3LZ